150kW / 188kVA Open Type Diesel Generator
Exposed Engine Architecture | Engine: 6R155ZLD | SKU: YMDL-150GF-OPEN
A massive 150kW Diesel Generator ready for factory-scale loads.
Engineering Data & Specifications
| Metric | Performance Values |
|---|---|
| System SKU | YMDL-150GF-OPEN |
| Rated Power (Standby) | 150 kW / 188 kVA |
| Rated Power (Prime) | 135 kW / 169 kVA |
| Rated Voltage | 400V / 230V (3-Phase 4-Wire) |
| Rated Frequency | 50 Hz |
| Power Factor | 0.8 (Lagging) |
| Engine Model | 6R155ZLD (Weifang) |
| Engine Type | 4-Stroke, Water-Cooled, In-line 4-Cylinder |
| Displacement | 4.15 L |
| Rated Engine Speed | 1500 RPM |
| Alternator | Half-Copper Brushed (Default) |
| Controller | Industrial Diagnostics System (Default) |
| Frame Construction | None (Heavy-duty steel base frame) |
| IP Rating | IP23 (Requires indoor/sheltered installation) |
| Fuel Tank Capacity | Base tank for ≥ 8 hours at full load |
| Dry Weight | 1100 kg |
| Dimensions (L × W × H) | 2400 × 940 × 1250 mm |
| Starting System | Electric Start (12V / 24V) |
| Cooling System | Water-Cooled with Radiator |
| Certification | ISO 8528 / CE |
150kW Diesel Generator Guardian
Strict monitoring for your 150kW Diesel Generator.
Why it matters: Heavy-duty open generators often run in hot, dusty rooms. A sudden drop in oil or spike in temperature goes unnoticed until it's too late. This module is your automated mechanic.
Operating an open base-frame generator requires reliable fail-safes. Whether a stray piece of debris blocks the radiator or a sudden electrical fault occurs downstream on your site, the control module instantly isolates the problem, stopping the engine dead in tracks to preserve its mechanical integrity.
-
Oil DefenseSecures 150kW Diesel Generator bearings.
-
Temp ControllerRegulates 150kW Diesel Generator block heat.
-
RPM SafeguardHalts 150kW Diesel Generator runaway.
-
Amp ShieldIsolates the 150kW Diesel Generator.
Core Advantages of the Open-Frame Build
150kW Steel Skid
Holds the 150kW Diesel Generator steady.
150kW Airflow Mastery
Cooling for the 150kW Diesel Generator.
150kW Open Inspection
Clear view of the 150kW Diesel Generator.
High 150kW ROI
Invest smart in this 150kW Diesel Generator.
150kW Base Tank
Endurance for the 150kW Diesel Generator.
6R155ZLD Dominance
Powering the 150kW Diesel Generator.
Physical Dimensions & Weight
Frequently Asked Questions
Is 150kW enough power for my facility?
A typical 150kW generator can power lighting, refrigeration, water pumps, and several air conditioning units simultaneously. For a standard facility under 300m², 150kW is usually sufficient for essential loads. We recommend listing your equipment wattage for a precise sizing check.
How much fuel does the 150kW generator consume per hour?
At full load, the 6R155ZLD engine consumes approximately 7–8 litres of diesel per hour. At 75% load (typical operating condition), fuel consumption drops to around 5.5–6.5 litres/hour. The built-in base tank supports ≥8 hours of runtime at full load.
Can I install this open type unit outdoors permanently?
No. Open type generators must be installed indoors in a dedicated, well-ventilated generator room or under a protective shelter. They are not waterproof and should not be exposed to direct rain or extreme weather without a canopy.
What does the "Four Protection System" controller do?
The standard controller monitors four critical parameters in real-time: oil pressure, coolant temperature, engine over-speed, and over-current. If any parameter exceeds the safe threshold, the controller will automatically shut down the engine to prevent damage. It can be upgraded to a Full Auto (ATS) system for unmanned, automatic operation.
What is the difference between the brushed and brushless alternator options?
The default half-copper brushed alternator requires periodic brush replacement but is cost-effective for standard applications. The brushless variants (half-copper or full-copper) eliminate brush wear, provide cleaner power output, and are more suitable for sensitive electronics or installations with minimal maintenance access.
Do you offer wholesale or bulk order pricing?
Yes. As a direct manufacturer, we offer competitive wholesale pricing for bulk orders. The listed price of $3,553 reflects the default single-unit FOB China price. Please contact us with your quantity and specifications for a tailored quotation.
Ready to Order or Need a Custom Quote?
Contact our team for bulk pricing, upgrade configurations, shipping estimates, and OEM options.